Static Pressure Centrifugal Ventilating Fans for Car

Static Pressure Centrifugal Ventilating Fans for Car

This Static Pressure Centrifugal Ventilating Fans for Car belongs to the DKF series of low noise centrifugal fans. It is derived from the YE2-DW series of low noise centrifugal fans to meet any airflow and pressure requirements in air conditioning design and selection. The product has the characteristics of low noise, high efficiency, large airflow, low speed and small quality. It includes a forward type (DKF series) and a reverse type (DKF (H) series).
Product description

Product introduction:

This Static Pressure Centrifugal Ventilating Fans for Car belongs to the DKF series of low noise centrifugal fans. It is derived from the YE2-DW series of low noise centrifugal fans to meet any airflow and pressure requirements in air conditioning design and selection. The product has the characteristics of low noise, high efficiency, large airflow, low speed and small quality. It includes a forward type (DKF series) and a reverse type (DKF (H) series). It adopts fully galvanized sheet, adjustable frame structure on the left and right, and can be replaced by pulleys. It is the most ideal accessory product in the air industry. It can be widely used in air conditioning, purification, paint drying rooms and refrigeration.

Product features:

1. The outer casing of Static Pressure Centrifugal Ventilating Fans for Car is welded with galvanized steel, so it has good durability and good appearance. The forward impeller consists of front and rear multi-blade arc blades, before riveting and in the middle plate. It is made of finely machined galvanized steel. The rearward impeller consists of a rear curved blade that is fixed by a special clamp and welded to the front and middle plates.

2. Static Pressure Centrifugal Ventilating Fans for Car is calibrated by static and dynamic balance after molding, with low vibration during operation, good aerodynamic performance, low noise and stable operation. All parts of the impeller are stamped and formed in one piece with a mold to ensure accuracy and then calibrated by static and dynamic balance after forming.

3. Use high quality carbon structural steel as the shaft material. In the design process, the shaft material passes the secondary verification of the critical speed, which has high strength, excellent rigidity and stability.

4. The air inlet is made of galvanized steel plate formed by a mold. It is mounted on both sides of the fan, and the curved portion is parallel to the axial direction, so that the airflow is smooth and the loss is smaller. Imported or domestically renowned high-grade bearings. The V-belt is used for transmission, and a large number of working conditions are obtained by changing the diameter of the pulley, which can fully meet the requirements of the air-conditioning fan for airflow and air pressure.

Product application:

1. Ventilation of buildings such as industrial, civil, mining, tunnels, and subways.

2. It is used together with various forms of air conditioners and air purifiers.

3. It is used for ventilation and drying rooms in various automobile spray booths.

11.jpg

Related Products
Feedback

Copyright © Jiangsu Shuangju Fans Co.,Ltd All Rights Reserved.Tel: +86-515-88669968