High Temperature Industrial Kitchen Smoke Exhaust Plug Fans | Blower GW Series

High Temperature Industrial Kitchen Smoke Exhaust Plug Fans | Blower GW Series

GW series fan is a kind of new energy-saving product that is successfully developed by Jiangsu Shuangju Fans Co., Ltd.Shuangju Fans based on requirements of domestic and overseas coating production line and introduction of foreign advanced technology.
Product description

GW series fan is a kind of new energy-saving product that is successfully developed by Jiangsu Shuangju Fans Co., Ltd.Shuangju Fans based on requirements of domestic and overseas coating production line and introduction of foreign advanced technology. It is applicable to delivery of gas with temperature of 100℃ - 280℃ under high-temperature environment like hot air circulation, drying equipment, hot blast stove etc., and its performance fully meets the requirements for ventilation of every kind of complete set of coating equipment.


GW series fans fall into two types, namely, plug-in type ordinary high temperature and plug-in type explosion-proof high temperature, with the explosion-proof type at throat, while the motor is not an explosion-proof one. A large amount of industrial water can be saved by air-cooling device. Such fans have the advantages of compact structure and convenient installation and commissioning. There are ten machine Nos, namely, 3.6, 4, 4.5, 5, 6, 7, 8, 9.5, 10 and 12.


Each kind of fan can be made in the form of either right rotation or left rotation. When it is viewed from the front of the motor, the fan is called right-rotation fan and represented by Right in case that its impellers rotate clockwise; those whose impellers rotate counter-clockwise are called left-rotation fan and represented by Left.


The location of fan outlet  is represented by the angle of air outlet of casing, and both Right and Left fans can be made in four angles of 0°, 90°, 180° or 270°. It may also made in other angle as per customer requirement, which shall be instructed otherwise when placing order.


Those that are equivalent in inlet conditions and appropriate in performance can be selected, but the highest temperature shall not exceed 280℃.. In case of medium temperature required to be greater than 280℃ by the user in selection, special order shall be instructed during placing order.


This fan is mainly consisted of impeller, casing, air inlet, high-temperature drive frame, etc. Belt transmission is adopted and the impeller is strictly calibrated through static and dynamic balance to ensure stable operation of the fan.


Related Products
Feedback

Copyright © Jiangsu Shuangju Fans Co.,Ltd All Rights Reserved.Tel: +86-515-88669968